https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Fiber optic converter with integrated optical diagnostics, alarm contact, for PROFIBUS up to 12 Mbps, Tcoupler with two fiber optic interfaces (SC-Duplex), 1300 nm, for fiberglass cable
Product Description
The PSI-MOS-PROFIB/FO... devices convert copper-based PROFIBUS interfaces to fiber optics.
The integrated optical diagnostics allow permanent monitoring of the FO paths during installation and also during operation. The floating switch
contact is activated when the signal output on the fiber optic paths drops to a critical level.
The PSI-MOS-PROFIB/FO... T T-couplers allow the interface to be converted for two FO cables. They can be used to create linear structures and
ring structures for increased system availability.
Your advantages
Supply voltage and data signals routed through via DIN rail connectors
Can be combined with the PSI copper repeater in a modular way using DIN rail connectors
Connections can be plugged in using a COMBICON screw terminal block
Automatic data rate detection or fixed data rate setting via DIP switches
Redundant power supply possible by means of optional system power supply unit
High-quality electrical isolation between all interfaces (PROFIBUS // fiber optic ports // power supply // DIN rail connector)
Approved for use in zone 2
Integrated optical diagnostics for continuous monitoring of fiber optic paths
Floating switch contact for leading alarm generation in relation to critical fiber optic paths
Bit retiming for any cascading depth
Suitable for all data rates up to 12 Mbps
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356174053
Weight per Piece (excluding packing)
263.900 g
Custom tariff number
85176200
Country of origin
Germany
02/27/2020 Page 1 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
35 mm
Height
105 mm
Depth
106 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
30 % ... 95 % (non-condensing)
Altitude
≤ 5000 m (For restrictions, see the manufacturer's declaration for
altitude operation)
Degree of protection
IP20
Noise immunity
EN 61000-6-2:2005
General
Bit distortion, input
± 35 % (permitted)
Bit distortion, output
< 6.25 %
Electrical isolation
VCC // RS-485
Test voltage data interface/power supply
1.5 kVrms (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive 89/336/EC
Noise emission
EN 55011
Net weight
263.9 g
Housing material
PA 6.6-FR
Color
green
MTBF
307 Years (Telcordia standard, 25°C temperature, 21% operating cycle
(5 days a week, 8 hours a day))
64 Years (Telcordia standard, 40°C temperature, 34.25% operating
cycle (5 days a week, 12 hours a day))
MTTF
614 Years (SN 29500 standard, temperature 25 °C, operating cycle 21
% (5 days a week, 8 hours a day))
272 Years (SN 29500 standard, temperature 40 °C, operating cycle
34.25 % (5 days a week, 12 hours a day))
113 Years (SN 29500 standard, temperature 40 °C, operating cycle 100
% (7 days a week, 24 hours a day))
Power supply
Nominal supply voltage
24 V DC (With UL approval)
Supply voltage range
18 V DC ... 32 V DC
Max. current consumption
145 mA
Typical current consumption
85 mA (24 V DC)
170 mA (According to UL Listed, 24 V DC)
02/27/2020 Page 2 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Technical data
Power supply
110 mA (According to UL Recognized, 24 V DC)
Connection method
COMBICON plug-in screw terminal block
Interfaces
Interface 1
PROFIBUS acc. to IEC 61158, RS-485 2-wire, half duplex, automatic
control
Operating mode
Semi-duplex
Connection method
D-SUB-9 female connector
File format/coding
UART (11 Bit, NRZ)
Data direction switching
Automatic control
Transmission medium
Copper
Transmission length
≤ 1200 m (depending on the data rate, with shielded, twisted pair data
cable)
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Serial transmission speed
≤ 12 Mbps
Optical interface FO
No. of channels
2
Wavelength
1300 nm
Transmission length incl. 3 dB system reserve
25 km (With F-G 50/125 0.7 dB/km at 1300 nm)
22 km (with F-G 62.5/125 0.8 dB/km at 1300 nm)
45 km (With F-E 9/125 0,4 dB/km at 1300 nm)
Transmission medium
Multi-mode fiberglass
Single-mode fiberglass
Transmission protocol
Protocol-transparent to the RS-485 interface
Connection method
SC duplex
Digital outputs
Output name
Relay output
Output description
Alarm output
Number of outputs
1
Maximum switching voltage
60 V DC
42 V AC
Limiting continuous current
1A
Conformance/approvals
Designation
CE
Identification
CE-compliant
Designation
EAC
02/27/2020 Page 3 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Technical data
Conformance/approvals
Identification
EAC
Designation
ATEX
Identification
II 3 G Ex nA nC IIC T4 Gc X
Additional text
Please follow the special installation instructions in the documentation!
Designation
UL, USA/Canada
Identification
508 Listed
508 Recognized
Designation
Corrosive gas test
Identification
ISA-S71.04-1985 G3 Harsh Group A
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC directive 89/336/EC
Type of test
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result
5g, 10...150 Hz, 2.5 h, in XYZ direction
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result
15g, 11 ms period, half-sine shock pulse
Noise emission
EN 55011
Noise immunity
EN 61000-6-2:2005
Free from substances that could impair the application of coating
according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
Connection in acc. with standard
CUL
Standards/regulations
EN 61000-4-2
Contact discharge
± 6 kV
Standards/regulations
EN 61000-4-3
EN 61000-4-4
Comments
Criterion B
Standards/regulations
EN 61000-4-5
Signal
± 1 kV
Standards/regulations
EN 55011
EN 61000-4-6
Shock
15g in all directions in acc. with IEC 60068-2-27
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
02/27/2020 Page 4 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Application drawing
Point-to-point connection
02/27/2020 Page 5 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Application drawing
Redundant point-to-point connection
02/27/2020 Page 6 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Application drawing
Line structure
02/27/2020 Page 7 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Application drawing
Star structure
02/27/2020 Page 8 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Application drawing
Tree structure
02/27/2020 Page 9 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Application drawing
Redundant FO ring
Classifications
eCl@ss
eCl@ss 4.0
27230200
eCl@ss 4.1
27230200
eCl@ss 5.0
27230200
eCl@ss 5.1
27230200
eCl@ss 6.0
19179200
eCl@ss 7.0
19179290
eCl@ss 8.0
19179290
eCl@ss 9.0
19170114
ETIM
ETIM 2.0
EC001423
ETIM 3.0
EC001423
ETIM 4.0
EC001423
ETIM 5.0
EC000310
ETIM 6.0
EC001467
02/27/2020 Page 10 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Classifications
ETIM
ETIM 7.0
EC001467
UNSPSC
UNSPSC 6.01
30211506
UNSPSC 7.0901
39121008
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 13.2
43222604
UNSPSC 18.0
43223323
UNSPSC 19.0
43223323
UNSPSC 20.0
43223323
UNSPSC 21.0
43223323
Approvals
Approvals
Approvals
UL Listed / UL Recognized / cUL Recognized / cUL Listed / EAC / KC / EAC / cULus Recognized / cULus Listed
Ex Approvals
ATEX
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
02/27/2020 Page 11 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Approvals
EAC
EAC-Zulassung
KC
http://eng.kcc.go.kr/user/ehpMain.do
MSIP-REIPCK-2708892
EAC
RU *DE.A*30.B.01735
cULus Recognized
cULus Listed
Accessories
Accessories
Data cable by the meter
FO cable - PSM-LWL-GDO- 50/125 - 2799432
Fiberglass cable, duplex 50/125 µm, by the meter, without connector, for outdoor installation
FO cable - PSM-LWL-GDM-RUGGED- 50/125 - 2799322
Fiber glass cable, duplex 50 µm/125 µm, by the meter, without male connector, for installation in stationary systems
and machines
Data cable preassembled
02/27/2020 Page 12 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Accessories
FO patch cable - FL MM PATCH 1,0 LC-SC - 2989161
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: LC/SC duplex, degree of
protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
FO patch cable - FL MM PATCH 2,0 LC-SC - 2989268
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: LC/SC duplex, degree of
protection: IP20, for installation in cable ducts or control cabinets, length: 2 m
FO patch cable - FL MM PATCH 5,0 LC-SC - 2901800
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: LC/SC duplex, degree of
protection: IP20, for installation in cable ducts or control cabinets, length: 5 m
FO patch cable - FL MM PATCH 1,0 SC-SC - 2901805
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/SC duplex,
degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
FO patch cable - FL MM PATCH 2,0 SC-SC - 2901807
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/SC duplex,
degree of protection: IP20, for installation in cable ducts or control cabinets, length: 2 m
02/27/2020 Page 13 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Accessories
FO patch cable - FL MM PATCH 5,0 SC-SC - 2901808
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/SC duplex,
degree of protection: IP20, for installation in cable ducts or control cabinets, length: 5 m
FO patch cable - FL MM PATCH 1,0 SC-ST - 2901809
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/B-FOC(ST),
degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
FO patch cable - FL MM PATCH 2,0 SC-ST - 2901810
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/B-FOC(ST),
degree of protection: IP20, for installation in cable ducts or control cabinets, length: 2 m
FO patch cable - FL MM PATCH 5,0 SC-ST - 2901811
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/B-FOC(STⓇ),
degree of protection: IP20, for installation in cable ducts or control cabinets, length: 5 m
FO patch cable - FL MM PATCH 1,0 SC-SCRJ - 2901812
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/SC-RJ, degree
of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
02/27/2020 Page 14 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Accessories
FO patch cable - FL MM PATCH 2,0 SC-SCRJ - 2901813
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/SC-RJ, degree
of protection: IP20, for installation in cable ducts or control cabinets, length: 2 m
FO patch cable - FL MM PATCH 5,0 SC-SCRJ - 2901814
Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/SC-RJ, degree
of protection: IP20, for installation in cable ducts or control cabinets, length: 5 m
FO patch cable - FL SM PATCH 1,0 LC-SC - 2989190
Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber)
connector: LC/SC duplex, degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
FO patch cable - FL SM PATCH 2,0 LC-SC - 2989297
Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber)
connector: LC/SC duplex, degree of protection: IP20, for installation in cable ducts or control cabinets, length: 2 m
FO patch cable - FL SM PATCH 5,0 LC-SC - 2901827
Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber)
connector: LC/SC duplex, degree of protection: IP20, for installation in cable ducts or control cabinets, length: 5 m
02/27/2020 Page 15 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Accessories
FO patch cable - FL SM PATCH 1,0 SC-SC - 2901829
Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber)
connector: SC duplex/SC duplex, degree of protection: IP20, for installation in cable ducts or control cabinets, length:
1m
FO patch cable - FL SM PATCH 2,0 SC-SC - 2901830
Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber)
connector: SC duplex/SC duplex, degree of protection: IP20, for installation in cable ducts or control cabinets, length:
2m
FO patch cable - FL SM PATCH 5,0 SC-SC - 2901831
Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber)
connector: SC duplex/SC duplex, degree of protection: IP20, for installation in cable ducts or control cabinets, length:
5m
FO patch cable - FL SM PATCH 1,0 SC-ST - 2901832
Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber)
connector: SC duplex/B-FOC(STⓇ), degree of protection: IP20, for installation in cable ducts or control cabinets,
length: 1 m
FO patch cable - FL SM PATCH 2,0 SC-ST - 2901833
Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber)
connector: SC duplex/B-FOC(STⓇ), degree of protection: IP20, for installation in cable ducts or control cabinets,
length: 2 m
02/27/2020 Page 16 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Accessories
FO patch cable - FL SM PATCH 5,0 SC-ST - 2901834
Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm (OS2, Low Water Peak Fiber)
connector: SC duplex/B-FOC(STⓇ), degree of protection: IP20, for installation in cable ducts or control cabinets,
length: 5 m
FO patch cable - FOC-GDM-RUGGED-1016/IP20/... - 2901558
Robust GOF installation cable for assembly (IP20 heads only) for installation in stationary systems and machines,
aramid strain-relief elements, with individual elements made from FRNC material, halogen-free, ozone and UV
resistant, with a polyurethane (PUR) outer sheath
FO patch cable - FOC-GDM-RUGGED-1016/... - 1402193
rugged GOF installation cable for inner areas with highly tear-proof aramid strain-relief elements. Individual elements
consist of highly flexible FRNC material. The cable is halogen-free, ozone and UV resistant and has a rugged
polyurethane (PUR) outer sheath.
FO patch cable - FOC-GDO-1017/IP20/... - 2901559
Highly rugged GOF round cable (IP20 heads only) for assembly and for outdoor installation with integrated moisture
barrier as well as rodent-proof scrim. Individual elements made from highly flexible FRNC material. The wire is ozone
and UV resistant with a very rugged polyethylene outer sheath.
Data plug
D-SUB bus connector - SUBCON-PLUS-PROFIB/90/PG/SC - 2313708
D-SUB connector, 9-pos., male connector, cable entry < 90°, bus system: PROFIBUS DP up to 12 Mbps with PG
D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin
assignment: 3, 5, 6, 8; screw connection terminal blocks
02/27/2020 Page 17 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Accessories
D-SUB bus connector - SUBCON-PLUS-PROFIB/90/PG/IDC - 2313685
D-SUB connector, 9-pos., male connector, cable entry < 90°, bus system: PROFIBUS DP up to 12 Mbps with PG
D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin
assignment: 3, 5, 6, 8; IDC terminal block connection
D-SUB bus connector - SUBCON-PLUS-PROFIB/AX/M12 - 2902321
D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) under 180° (axial). Bus system:
PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator.
D-SUB bus connector - SUBCON-PLUS-PROFIB/90X/M12 - 2902729
D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) under 90°. Bus system: PROFIBUS
DP up to 12 Mbps. Termination resistor via separate M12 terminator. Long version; S7-compatible.
D-SUB bus connector - SUBCON-PLUS-PROFIB/90/M12 - 2902318
D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) under 90°. Bus system: PROFIBUS
DP up to 12 Mbps. Termination resistor via separate M12 terminator.
D-SUB bus connector - SUBCON-PLUS-PROFIB/35/M12 - 2902320
D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) under 35°. Bus system: PROFIBUS
DP up to 12 Mbps. Termination resistor via separate M12 terminator.
Interface converter
02/27/2020 Page 18 / 19
https://www.phoenixcontact.com/gb/products/2708892
FO converters - PSI-MOS-PROFIB/FO1300 T - 2708892
Accessories
Repeater - PSI-REP-PROFIBUS/12MB - 2708863
Modular repeater for electrical isolation and range increase for PROFIBUS up to 12 Mbps, 4-way isolation, railmountable, supply 24 V DC
Terminal resistor
Termination resistor - PSI-TERMINATOR-PB-TBUS - 2702636
Active termination resistor for PROFIBUS and RS-485 bus systems, redundant power supply, routing of the supply
voltage via DIN rail connector, electrical isolation, switchable termination, integrated programming interface
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
02/27/2020 Page 19 / 19